The soft color of the decorative lighting has won wide acclaim from the market

Correct installation is a prerequisite
To
Correct installation of lamps is a prerequisite for prolonging the service life of lamps. If it is installed incorrectly, the lamp will easily break, and sometimes even explode, which is very dangerous. In the home, the bathroom and kitchen lamps and lanterns should be installed with special care.
The lamp in the bathroom must be equipped with a moisture-proof lampshade, otherwise it will greatly shorten the service life of the lamp; special attention should be paid to the kitchen lamp to prevent oil fume, because the accumulation of grease will affect the illuminance of the lamp; and the light-colored lampshade has better light transmittance, but It is easy to stick to dust, so you should wipe it diligently to avoid affecting the penetration of light. Generally speaking, do not place kitchen and bathroom lamps in a location where water vapor can condense, so as to avoid bursting.
Early replacement of aging lamps
The two ends of the lamp tube of the lamp will be red or black after being used for a long time, so it must be replaced in time to prevent unsafe factors such as the ballast from burning out. Generally speaking, when buying a lamp, the effective time will be marked on the lamp bulb. Regular replacement of aging lamps and bulbs is very helpful for the overall maintenance of the lamp.
The cleaning method should be correct
After the lamp is used for a period of time, a thick layer of ash will deposit on it, which affects our vision and needs to be cleaned regularly. In the process of cleaning, be careful not to change the structure of the lamp, and do not change the parts of the lamp casually. After the cleaning and maintenance, the lamp should be installed as it is, and do not miss or wrongly install the lamp parts.
Generally, the lamps should be wiped with a dry cloth, and attention should be paid to prevent the intrusion of moisture. If the lamps are non-metallic, they can be wiped with a damp cloth to prevent dust from accumulating and hampering the lighting effect. To
Frequent switching on and off of the most harmful lights
Do not switch on and off frequently when the lamp is in use, because the current through the filament is greater than the current during normal operation when the lamp is frequently started, which makes the temperature of the filament rise sharply and accelerate sublimation, which will greatly reduce its service life, so try to Reduce the number of times the lamps are switched on and off.